Innovate, disrupt, code the future. 💻�🚀

Use Cable TDR Diagnostics on Cisco 3750 Switches

Cisco 3750 Switches now include a time domain reflectometer!

Historical platform note (updated July 2026): This Cisco 3750 cable-diagnostics example is retained for its troubleshooting concept. Confirm command availability and output on the exact supported switch and software release.

How many time have you wanted to know how long a cable run was? Now if you are running cisco 3750 switches you can find out by issuing the following commands you can see how long that cable run really is.

2008-09-08

Configure Check Point-to-Juniper VPN Proxy IDs

Checkpoint —> juniper VPN

Recently at work we had a remote site go down. The site was on an ancient pix 506e vpn firewall router. We were in the proccess of switching to a different vpn solution. because of this we had a new Juniper ssg20 firewall device on site.

Now I thought this would be an easy job, configure the Juniper to connect to our checkpoint r55 box the same as the pix had done before! Man was I surprised to realize that the Juniper did not like the r55. The r55 sends proxy id’s through the tunnel for every device connecting. Now the interesting this is that the r55 uses the supernet for the address requesting access through the vpn. On the cisco pix and asa devices, this does not much matter. So for instance if you hav 10.0.0.0/24, 172.16.2.0/23 and 192.168.0.0/24 on 1 side all trying to access a remote site through the Juniper, the checkpoint send the juniper proxy id’s for each of those networks. Now like I said the cisco determines what traffic matches the tunnel with access-lists and doesn’t much care what the proxy ID says. The juniper on the other hand does! If it sees a proxy id for say a host that is not part of the tunnel, it will tear down the tunnel!!!!

2008-09-04

Cisco 3640 WIC-1ADSL Speed Troubleshooting

Cisco 3640 and wic-1adsl speed problems

Historical platform note (updated July 2026): This Cisco 3640/WIC-1ADSL investigation concerns retired equipment. Use current platform telemetry and vendor documentation when diagnosing modern DSL or WAN performance.

I recently decided to plug my wic-1adsl card into a 3640 router because my 2620 had a power supply failure. I noticed that the cisco 3640 ran very slow, and speed tests topped out at 2.6mbps downlink speeds. For a while I couldn’t figure out why a router that is faster with more memory would run slower than my 2620 router. I later discovered the reason for the slowness was because of a bandwidth limit on the nm-1fe1r2w card I was using to give me wic slots.

2008-09-02

IPv6 Video Tutorial

Video tutorial on IPV6

You can download or watch the full video at IPV6<embed bgcolor="#FFFFFF"

2008-05-15

liveplasmacom

liveplasma.com

I found a really cool site that displays related content in a visual way, so if for instance you type in an Artist name like Pinback, it will show all related artists in a very cool visual way, very similar to some of the visual displays for Digg.com

2008-02-09

outlook-2003-error-setting-up-profile-after-uninstalling-office-2007

Outlook 2003 error setting up profile after uninstalling office 2007

This is a problem that I run into quite alot as most new PCs come with the Office 2007 trial pre-installed. When you try to setup Outlook 2003 for the first time you get the following error

“There was an error locating one of the items needed to complete this operation. It might have been deleted”

In order to fix this error you have to rename ‘mapisvc.inf’ one in

2008-02-06

new-forums

New Forums

We have added a new forums section to techinvasion.net. We hope these forums will become a big part of the site and allow all the users to participate, ask questions, and get answers. The link to the forums is along the left hand side of the page in the categories section. You can also go directly to the forums by going to /forum.

We are also looking for writers to post relevant articles such as the ones that have been posted by our 3 writers so far. If you are interested in writing for techinvasion.net please send an email to admin@techinvasion.net.  

2008-01-31

fixing-the-sku01acab-and-other-office-cab-file-issues

Fixing the SKU01A.CAB and other office cab file issues

Anyone who has used office 2003 has noticed that when switching domains or logging in as a new user Microsoft Office ask you to insert the cd to cache files needed to start. In some cases it asks for files from older office versions that have been upgraded, sometimes you don’t even have the original cd. To solve this problem you can make a simple change to the registry that tells office not to expect cached files off the installation cd.

2008-01-30

Cisco IOS Firewall Security and Packet Filtering

�The Cisco IOS has many powerful security features that enable network engineers to protect their internal network. The Cisco IOS is capable of intrusion detection, deep packet inspection, and stateful firewall features. Setting up IPS allows the admin to push intrusion detection to the network edge. The Cisco IPS feature set can scan for spyware, viruses, worms, Trojans, and network intrusions by receiving updated signature files from Cisco. If a packet or series of packets matches a particular signature the router can, send an alert, drop the packet, or reset the connection of the offending user. In this way the network engineer can better protect the network by acting on suspicious packets before they can pose a risk to the network infrastructure, another advantage of pushing IPS duties to the network edge is it allows offending packets to be dropped before they take up finite network resources. �In large networks as much as 10 percent of network resources could be consumed by packets that ultimately will be dropped for security reasons deeper in the network.

2008-01-29

Configure Cisco WIC-1ADSL on IOS 12.4

Cisco WIC-1ADSL config for 1800 series router and ios 12.4

Historical platform note (updated July 2026): This Cisco 1800/IOS 12.4 example targets retired hardware and legacy PPPoE syntax. Validate every command and provider requirement on supported equipment before use.

This config is for the Cisco 1800 series router running IOS 12.4. IOS 12.4 has some command and syntax changes in reguards to interfaces and configuration commands for PPPOE. This config was submitted by my good friend Pedro Rivera.

2008-01-28